DetailsFolded Lampshade _Designed by hakalan ( http://www.thingiverse.com/thing:110736/#files ) _Instructions written by Designer: "Here is how to build it:Print it as a vase: No infill, no top layers, a few bottom layers, one perimeter. (Mine is flexible, but not too fragile.) Find a suitable lamp holder. This is what I used: http://www.clasohlson.com/uk/Lampholder/Pr321719000 http://www.clasohlson.com/uk/Nipple-Nut-Mix-10-mm/32-3424 Drill a hole in the base of the lamp. For the parts above, a 10 mm hole is suitable to fit between the strain relief and the lamp holder. Mount the lamp holder and don't forget the cord... PLEASE only use a low power LED bulb and check that it does not get too hot. If you use a regular light bulb (15W or more), the plastic will probably melt, catch fire and burn down your house and family.
- Additional Information
SKU 10000829 Length [mm] 100.25 Width [mm] 100.32 Height [mm] 140 Volume [cm³] 525.68 Area [cm²] 1590.31