Spearfishing wetsuits must be worn in most water sportsto protect the athlete’s body from various forms of external aggression. Custom spearfishing wetsuits can be very beautiful to the sight and immediately make you want to get in on the action, but that is not their main reason for being, of course. Also, there are three categories of spearfishing wetsuits from which you will have to choose your future equipment:
- Custom spearfishing wetsuit
This is the type of neoprene spearfishing wetsuit that is the most used today. This thin combination will bring you a certain flexibility in your gestures. Above all, it has the particularity of being able to retain the water that has infiltrated between the suit and the body of the diver, if possible. The use of the wet suit is recommended when you need to swim in relatively warm water, over 25°C.
- The semi-dry suit
This type of suit has a reinforced seal compared to wet models and thanks to sleeves located at the ankles, wrists, and neck. The water is trapped between the body and the suit. Therefore, circulates much less, and thus allows the wearer of a custom spearfishing wetsuit to retain his body heat. It is also less easy to put on and more suitable in waters where the temperature is between 15 and 25°C.
- The drysuit
The drysuit is a perfectly waterproof spearfishing wetsuit, as its name suggests. This custom spearfishing wetsuit will however be the need to accompany this neoprene equipment with an undersuit or other clothing is worn underneath. This category of spearfishing wetsuit is excellent for tackling long dives and in water areas with very low temperatures, under 15°C.
Choose the right spearfishing wetsuit thickness
- For your spearfishing sessions, first, you must choose your custom spearfishing wetsuit according to its thickness, and therefore its thermal insulation capacity.
- There are also 3 categories of Neoprene thicknesses to which you can turn: Spearfishing wetsuits of less than 3 mm; wetsuits between 3 and 5 mm; and those with a thickness of 5 to 9 mm. The figures are approximate when it comes to finding the right thickness of Neoprene that will do the job well for every temperature the ocean water will have.
- In short, you must think about covering yourself according to the circumstances to go spearfishing. The bottom of the spearfishing wetsuit can sometimes be less thick than the top, just as the two parts of the garment can be of the same thickness. In the first case, it quite simply allows, if necessary, to have more flexible pants and can be more comfortable when swimming. Every diver has their preferences on this, but we find it easier and more practical to buy a custom spearfishing wetsuit including the top, bottom, and scuba diving hood, if possible.
Custom spearfishing wetsuit design
Spearfishing wetsuits are made using Neoprene, which is a synthetic rubber, very useful for its ability to retain heat and reduce caloric exchange between the human body and cold water. Its buoyancy properties also make neoprene very suitable for the design of spearfishing wetsuits.
How to maintain your wetsuit?
Maintenance helps keep your custom spearfishing wetsuit longer. After each use, you must rinse this garment with clear, unsalted water. You will then need to dry it upside down and put it away as soon as it is dry, turning it right side up. However, it will not be a question of drying this garment in the sun but rather indoors, because the Neoprene custom spearfishing wetsuit deteriorates in contact with the rays of the sun.
